Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 51
SR600EX
USER’S GUIDE
50
b. You may have a DNS issue and the Pro Smart Repeater is not obtaining the IP settings from your
Home Network. Try to reboot the Pro Smart Repeater and then accessing a website. If that fails, then
reboot the Home Router to see if that fixes it.
c. There may be an IP conflict with your Home Network and your Extended Network. Try to adjust the
IP Settings of your Extended Network using IP values that are different from your Home Network.
I can no longer connect to the Pro Smart Repeater wirelessly.
a. Power on and off the Pro Smart Repeater and try again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to
the Pro Smart Repeater. Access
and run through the Smart Setup
Wizard again. After you have successfully reset the Home Network connection, try connecting
wirelessly again.
I could NEVER log onto the Pro Smart Repeater wirelessly.
a. Check that your wireless adapter supports WPA2 wireless security. If it does not then you will need to
change the wireless security on the Pro Smart Repeater. Go to the Web Menu, select Wireless
Settings and then Wireless Security. Select the Extended Network from the drop down menu and
either disable security or downgrade the security to WEP. Try connecting again.