Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 48)

SR600EX USER’S GUIDE
47
I cannot connect to my Home Network/Hot Spot. I received an Error when running the Smart Setup Wizard.
a. Your Home Network may be secured. Double check that you have the correct security key to connect
to the Home Network.
b. Try adjusting the channel number of your Home Network’s router to channel 5 thru 11. Then attempt
the Smart Setup Wizard again.
c. Check to see that your Home Network router’s DHCP server is enabled. The Pro Smart Repeater
needs to obtain an IP from your Home Network router.
I cannot find my Home Network/Hot Spot when scanning for wireless networks in the Smart Setup Wizard
a. The Pro Smart Repeater may be out of range. Move the Pro Smart Repeater closer towards the
wireless router and try the Setup Wizard again from the Web Menu.
b. The Home Network may be a dual band wireless router. The Pro Smart Repeater supports
802.11b/g/n 2.4GHz routers. If your Home Network uses a dual-band router, it will not work with the
Pro Smart Repeater. Adjust the dual-band router’s configuration to disable the 5GHz band.
c. Go to the Smart Features tab in the web menu and access the Wireless Coverage Controls. Make sure
the setting is at 100% and try again.
d. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden.