AEC HE Mass Flow Series Drying hoppers - Manual (Page 4)

HE
• CHE • BCHE Mass Flow Series Drying Hoppers
Page 3
Safety Considerations
AEC/Whitlock HE, CHE, and BCHE Mass Flow Series drying hoppers are designed to provide
safe and reliable operation when installed and operated within design specifications, following
national and local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Disconnect and/or lock out power before servicing or maintaining the dryer.
; Use care when LOADING, UNLOADING, RIGGING, or MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before working on this equipment. You
should remove the fuses and carry them with you.
; Make sure the dryer and components are properly GROUNDED before you switch on
power.
; Do not jump or bypass any electrical safety control.
; Do not restore power until you remove all tools, test equipment, etc., and the dryer and
related equipment are fully reassembled.
; Only PROPERLY TRAINED personnel familiar with the information in this manual should
work on this equipment.