AEC HE Mass Flow Series Drying hoppers - Manual (Page 19)

Page 18 HE
• CHE • BCHE Mass Flow Series Drying Hoppers
Use one of the following procedures to install the air delivery and return lines:
HE drying hoppers
Dryer hose of the proper diameter has been supplied with the dehumidifying dryer. Cut the hose
to length and connect it between the dryer process air delivery tube and the drying hopper heater
inlet with two band clamps. Repeat for the air return line.
Figure 6
Typical Single Hopper Drying Hose Installation
Process air return
Process air supply