How to attach the sunshield – ACTi Bullet Camera on Straight Wall with Bundled Bracket User Manual
Page 53
Installation Guide
How to Attach the Sunshield
The use of sunshield is optional if the camera will be installed indoors. However, if the camera will
be installed outdoors, attach the sunshield to protect the lens from all types of weather and
lighting conditions.
1.
Attach the sunshield onto the screw nuts using the supplied screws and washers.
2.
Slide to adjust the sunshield to cover the lens as far as possible but out
of the camera’s live
view.
3.
Tighten the screws to fix the position of the sunshield.
This manual is related to the following products:
- Bullet Camera on Straight Wall with Heavy Duty Bracket Bullet Camera on Tilted Wall with Bundled Bracket Bullet Camera on Hard Ceiling with Bundled Bracket Bullet Camera on Dropped Ceiling with Bundled Bracket Bullet Camera on Corner with Accessory Set Bullet Camera on Vertical Pole with Accessory Set