Step 4: connect the ethernet cable – ACTi Bullet Camera on Straight Wall with Bundled Bracket User Manual

Page 13

background image

Installation Guide

3.

Secure the clamping nut to the body.

Step 4: Connect the Ethernet Cable

1.

Connect the Ethernet cable to the Ethernet port inside the camera.

2.

When done, close the back cover by tightening the three (3) screws.

This manual is related to the following products:

Bullet Camera on Straight Wall with Heavy Duty Bracket Bullet Camera on Tilted Wall with Bundled Bracket Bullet Camera on Hard Ceiling with Bundled Bracket Bullet Camera on Dropped Ceiling with Bundled Bracket Bullet Camera on Corner with Accessory Set Bullet Camera on Vertical Pole with Accessory Set