Step 4: install the camera – ACTi Bullet Camera on Straight Wall with Bundled Bracket User Manual
Page 20
Installation Guide
2.
Attach the plate to the surface using the three (3) supplied screws.
3.
Attach the bracket to the plate.
Step 4: Install the Camera
1.
Depending on how you want to install the camera, attach the camera to the bracket through
one of the two (2) holes below or to the hole on the back cover (only in D3x series).
This manual is related to the following products:
- Bullet Camera on Straight Wall with Heavy Duty Bracket Bullet Camera on Tilted Wall with Bundled Bracket Bullet Camera on Hard Ceiling with Bundled Bracket Bullet Camera on Dropped Ceiling with Bundled Bracket Bullet Camera on Corner with Accessory Set Bullet Camera on Vertical Pole with Accessory Set