Step 3: install the ethernet cable, Installation guide – ACTi Bullet Camera on Straight Wall with Bundled Bracket User Manual
Page 12
Installation Guide
4.
Insert the sealing insert and attach it at the end of the flex conduit.
Step 3: Install the Ethernet Cable
1.
Insert the body (A) to the back cover and secure it with the lock nut (B).
2.
Insert the Ethernet cable through the back cover and then align the sealing insert to the gland
body.
(A)
(B)
This manual is related to the following products:
- Bullet Camera on Straight Wall with Heavy Duty Bracket Bullet Camera on Tilted Wall with Bundled Bracket Bullet Camera on Hard Ceiling with Bundled Bracket Bullet Camera on Dropped Ceiling with Bundled Bracket Bullet Camera on Corner with Accessory Set Bullet Camera on Vertical Pole with Accessory Set