Step 2: prepare the conduit gland and flex conduit, Installation guide – ACTi Bullet Camera on Straight Wall with Bundled Bracket User Manual

Page 11

background image

Installation Guide

Step 2: Prepare the Conduit Gland and Flex Conduit

1.

Disassemble the bundled conduit gland as shown below.

2.

Pull the Ethernet cable through the flex conduit.

3.

Insert the clamping nut through the flex conduit.

Clamping Nut

Sealing Insert

Lock Nut

Body

This manual is related to the following products:

Bullet Camera on Straight Wall with Heavy Duty Bracket Bullet Camera on Tilted Wall with Bundled Bracket Bullet Camera on Hard Ceiling with Bundled Bracket Bullet Camera on Dropped Ceiling with Bundled Bracket Bullet Camera on Corner with Accessory Set Bullet Camera on Vertical Pole with Accessory Set