Westermo MDI-112-F4G - Manual (Page 78)

74
default set default to rapid super ring
rapid-super-ring rapid super ring
super-ring super ring
Switch(config-multiple-super-ring)# version
rapid-super-ring
Priority Switch(config-multiple-super-ring)# priority
<0-255> valid range is 0 to 255
default set default
Switch(config)# super-ring priority 100
Ring Port Switch(config-multiple-super-ring)# port
IFLIST Interface list, ex: fa1,fa3-5,gi8-10
cost path cost
Switch(config-multiple-super-ring)# port fa1,fa2
Ring Port Cost Switch(config-multiple-super-ring)# port cost
<0-255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
Switch(config-multiple-super-ring)# port cost 100
<0-255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
Switch(config-super-ring-plus)# port cost 100 200
Set path cost success.
Rapid Dual Homing Switch(config-multiple-super-ring)#
rapid-dual-homing enable
Switch(config-multiple-super-ring)#
rapid-dual-homing disable
Switch(config-multiple-super-ring)#
rapid-dual-homing port
IFLIST Interface name, ex: fastethernet1 or gi8
auto-detect up link auto detection
IFNAME Interface name, ex: fastethernet1 or gi8
Switch(config-multiple-super-ring)#
rapid-dual-homing port fa3,fa5-6
set Rapid Dual Homing port success.
Note: auto-detect is recommended for dual Homing..
Ring Info