Westermo MDI-112-F4G - Manual (Page 39)

35
removing function. You can type in the specified IP and MAC address, then click
Add to add a new MAC&IP address binding rule for a specified link partner, like
PLC or any device without DHCP client function. To remove from the binding list,
just select the rule to remove and click Remove.
Option 82 IP Address Configuration: the DHCP server with option 82 function
presented in latest firmware. This feature support fully DHCP relay function, and
allows user to configured relay circuit ID, Remote ID to compliant fully DHCP
option 82 function.
Port and IP Address (Port Based DHCP Server configuration): the Switch also
supports port-based DHCP server function. It allows user assign specified IP
address to specified port that DHCP client presented; and the DHCP server only
offer the predefined IP address to the DHCP client.