Westermo MDI-112-F4G - Manual (Page 137)

133
Once you finish configuring the settings, click on Apply to apply your
configuration.
4.11.3 SysLog Configuration
System Log is useful to provide system administrator locally or remotely monitor
switch events history. There are two System Log modes provided by the switch,
local mode and remote mode.
Local Mode: In this mode, the switch will print the occurred events selected in
the Event Selection page to System Log table of The switch. You can monitor the
system logs in [Monitor and Diag] / [Event Log] page.
Remote Mode: The remote mode is also known as Server mode. In this mode,
you should assign the IP address of the System Log server. The switch will send
the occurred events selected in Event Selection page to System Log server you
assigned.