Westermo MDI-112-F4G User Manual
Page 76

72
1-65535, 32-bit based value range
from 1-200,000,000
Switch(config-if)# spanning-tree cost 200000
Port Priority
Switch(config-if)# spanning-tree port-priority
<0-240> Number from 0 to 240, in multiple of 16
Switch(config-if)# spanning-tree port-priority 128
Link Type - Auto
Switch(config-if)# spanning-tree link-type auto
Link Type - P2P
Switch(config-if)# spanning-tree link-type
point-to-point
Link Type – Share
Switch(config-if)# spanning-tree link-type shared
Edge Port
Switch(config-if)# spanning-tree edge-port enable
Switch(config-if)# spanning-tree edge-port disable
RSTP Info
Active status
Switch# show spanning-tree active
Rapid Spanning-Tree feature Enabled
Spanning-Tree BPDU transmission-limit 3
Root Address 0007.7c01.0386 Priority 4096
Root Path Cost : 200000 Root Port : 7
Root Times : max-age 20 sec, hello-time 2 sec,
forward-delay 15 sec
Bridge Address 0007.7cff.0102 Priority 4096
Bridge Times : max-age 10 sec, hello-time 2 sec,
forward-delay 15 sec
Aging time : 300
Port Role Port-State Cost Prio.Nbr
Type
------- ---------- ------------ ---------
---------- -----------
fa6 Designated Forwarding 200000 128.6
Auto(RST)
fa7 Root Forwarding 200000 128.7
Shared(STP)
RSTP Summary
Switch# show spanning-tree summary
Switch is in rapid-stp mode.
BPDU skewing detection disabled for the bridge.
Backbonefast disabled for bridge.
Summary of connected spanning tree ports :