Westermo MDI-112-F4G - Manual (Page 134)

130
Event Type: Power Failure
Power ID: Select Power 1 or Power 2 you want to monitor. When the power is
shut down or broken, the system will short Relay Out and light the DO LED.
Event Type: Link Failure
Link: Select the port ID you want to monitor.
How to configure: Select the checkbox of the Ethernet ports you want to monitor.
You can select one or multiple ports. When the selected ports are physically down,
the system will short Relay Output and light the DO LED.
Event Type: Ping Failure
IP Address: IP address of the target device you want to ping.
Reset Time (Sec): Waiting time to short the relay output.
Turn on the relay output
Turn off the relay output