Westermo MDI-112-F4G - Manual (Page 138)

134
Both: Both modes can be enabled at the same time.
Once you finish configuring the settings, click on Apply to apply your
configuration.
Note: When enabling Local or Both mode, you can monitor the system logs in
[Monitor and Diag] / [Event Log] page.
4.11.4 SMTP Configuration
The switch supports E-mail Warning feature. The switch will send the occurred
events to remote E-mail server. The receiver can then receive notification by
E-mail. The E-mail warning is conformed to SMTP standard.
This page allows you to enable E-mail Alert, assign the SMTP Server IP, Sender
E-mail, and Receiver E-mail. If SMTP server requests you to authorize first, you
can also set up the username and password in this page.