Westermo MDI-112-F4G - Manual (Page 120)

116
IP Filter:
Type ID/Name when select IP Filter. The ID for IP access list is listed as below of
the field. You can also type ACL name in this field, it goes to IP Extended mode
setting and support both IP Standard and IP Extended mode depend on the
setting. Click Add to add the rule. Click Edit to edit the content for the rule. After
configured, click Apply to apply all the rules. Reload to reload setting. Remove to
remove one of the entries.
Example:
IP Standard Access List: This kind of ACL allows user to define filter rules
according to the source IP address.
IP Extended Access List: This kind of ACL allows user to define filter rules
according to the source IP address, destination IP address, Source TCP/UDP port,
destination TCP/UDP port and ICMP type and code.
Click Edit to configure the IP Filter Rules.