2 customize ring back tone (transferring tone) – Welltech ePBX-100A-128 User Manual

Page 78

4.2 Customize Ring Back Tone (Transferring Tone)

User can customize Ring Back Tone by upload new wave file on ePBX-100A-128.

Please go to the Configuration

Æ IP PBX to check the Music Format first. If you choose

the Music to WAV format, please record wave file format as PCM, Channel Mode: Mono,

Frequency: 8K, Bit Rate: 16 bit. Enter Management

Æ Music Upload Æ Press

Browse…

Æ select wave file Æ Press Apply to upload special Ring Back Tone. After

Upload is finished, press Reboot to reboot system to renew Ring Back Tone.