Welltech ePBX-100A-128 - Manual (Page 10)

10
2.5 Step 5: To configure basic and essential configurations
To make ePBX-100A-128 work have to set some basic and essential configurations,
those include Network, Extension (FXS and IP Phone devices), and Trunk (FXO devices).
2.5.1 Network Configuration
Enter Management Æ Network to configure WAN and LAN IP.
„ WAN
•
Mode: Select ePBX-100A-128 WAN port network mode to be Fixed IP, DHCP or
PPPoE.
•
IP Address/Subnet Mask/Default Gateway: If user has set ePBX-100A-128 to be
fixed IP mode. User need to input IP address/Subnet Mask/ Default Gateway.
•
Primary DNS: Input Primary DNS address.
•
Secondary DNS: Input Secondary DNS address.
•
PPPoE ID: If user select PPPoE mode, here can input PPPoE account ID.
• PPPoE PWD: If user select PPPoE mode, here can input PPPoE account
password.
•
Mac: Mac address of ePBX-100 WAN port. The Mac address cannot be modified.
„ LAN