Welltech ePBX-100A-128 - Manual (Page 51)

51
T.38 FAX Setting
„ Mode: Enable or Disable T.38 FAX. Default is enabled.
„ T.38 Start Port: You can define the UDP port range for T.38 FAX that ePBX-100A-128
opened. Default start port is 4000.
„ T.38 End Port: You can define the UDP port range for T.38 FAX that ePBX-100A-128
opened. Default end port is 4999.
„ T.38 Redundancy: The number of error correction entries in a T.38 (UDPTL) packet. It
is useful for low bandwidth network, which will make the T.38 FAX more reliable. You
can set this field from 0 to 2. 0 means no Redundancy and 2 means 2 error correction
entries are within every T.38 (UDPTL) packet. Default is 2.
Note:
After changing the settings of T.38 FAX, please reboot system.
3.1.12 Other Setting
Enter Configuration
Æ Other Setting to configure the other setting.