Welltech ePBX-100A-128 - Manual (Page 25)

25
destination port of CDR server. Default is 23519.
„ Export CDR: If you chose the CDR Mode to Storage, you can press Export button to
download the CDR file. The CDR file is within a CSV format.
„ Ext Ring Time: This field defines the timeout value if the call is between Extension and
Extension. Default is 20 seconds.
„ Out Ring Time: This field defines the timeout value if the call is from Extension to
outside (define by routing table). Default is no limitation.
„ Hot-Key Tran: User can enable or disable Hot-key transfer function. If the call is
establish between Extensions. Enable this feature will permits the calling party or
called party to transfer a call by pressing the *0 (For Blind Transfer) or *9 (For
consultant Transfer) key. Default is disabled.
Note:
•
Please note that if this option is used, the RTP Mode will always be Routed Mode,
as ePBX-100A-128 needs to monitor the call to detect when the caller presses
the *0 or *9 key.
„ Music RBT: If this is call between extensions. Enabling this option will provide music to
the calling party until the call is answered.
„ Hot-Key Tran (After AA): User can enable or disable Hot-key transfer function. If the
call comes from Auto Attendant. Enable this feature will permits the calling party or
called party to transfer a call by pressing the *0 (For Blind Transfer) or *9 (For
consultant Transfer) key. Default is disabled.
„ Music RBT (After AA): If this is call comes from Auto Attendant. Enabling this option
will provide music to the calling party until the call is answered.
„ Music Format: Choose the Music to WAV or MP3 format.
„ Call Monitor Refresh: ePBX-100A-128 have call monitor function. The call situation
will be refreshed by the refresh time. Default is 30 seconds and user can change it
here.
„ RTP Timeout: It terminates a call if no RTP data received within the time specified.
„ Video Support: This field will enable video call.
„ Video Format: Choose video format as H.263 pass-through or MPEG pass-through.
„ SRVlookup Support: Enable or disable SRV lookup.
Office 1 Call Rule
Operator and AA setting
„ Operator: Configure the Operator number and the destination to Extension or Call
Group.
„ OP to EXT: If you set Operator to EXT, you can set extension number here.
„ OP to Group: If you set Operator to Group, you can set Group number here.
„ OP Ext End To: When you set Operator as an Extension, you can define the final