Welltech ePBX-100A-128 User Manual

Page 14

to Routed Mode directly; this way will avoid the “one-way voice” or “no voice

issue” of VoIP.

• If the both peers are under different subnet, or one peer is under Public IP but

another one is under Private IP, we strongly suggest you to set the RTP mode

to Routed Mode to avoid some unexpected voice problems.

Fixed Trunk ID: User can define a Fixed Trunk for a certain extension. When such

extension makes an outgoing call via routing table, ePBX-100A-128 will check “Fixed

Outgoing Call Rule” first. If “Fixed Outgoing Call Rule” is enabled, then

ePBX-100A-128 will confirm the Fix Trunk ID for the calling party. That means the

outbound call will be routed by Fixed Trunk ID, if you define the Fixed Trunk ID for the

calling party and you also enable “Fixed Outgoing Call Rule”.

Note:

•

For more information about Fixed Outgoing Call Rule, please refer to the user

manual: CH3.1.6.1 Outgoing Call Rule.

Absolute Timeout: Specific the timeout value for the outgoing calls. Please also go

to Outgoing Call Rule page to enable the Route Timeout function.

BLF: Enable BLF function for extensions.
Forward CallerID: By default, the “from header of SIP invite” will contain the caller’s

line number when forward function is activated. But this may make some errors

occurred for some SIP Trunk services. So we add this function in the “Extension

Setting” page, to let user modify the line number of SIP Invite’ s from header, from

calling party’s number to the called party’s number.

Comment: You can input a 10 bytes note for each extension here.
Mail Box: User can select to disable or enable mail box function. If this function is

enabled, user could input e-mail address for the Extension. When having voice mail of

incoming call, system will send this voice mail to the specified e-mail address. You can

also login the mail box system by dialing to *98, if you are using an ePBX-100A-128.

E-Mail Address: This field will appear when you enable Mail Box function and you can

input the E-Mail Address here for voice mail to E-mail.

Save VM to CF: Optional to not save voice mail to CF card.
VM Login Password: User can login voice mail system by dialing to *98, then input

the mailbox number and password for voice mail. User can define the Voice Mail box

*98+extension number. For example, dial to *98101 can login EXT101’s voice mail box,

and caller can just input password to access voice mail.

Note:

•

Please remember set the SMTP in the page of Management

Æ SMTP Setting

to activate the Voice Mail to E-mail.