beautypg.com

2 incoming call rule – Welltech ePBX-100A-128 User Manual

Page 44

background image

44

• For more information, please refer to the user manual: CH5.1 Application

between Welltech CPE device and ePBX-100A-128.

„ Fixed Outgoing Call Rule: ePBX-100A-128 will confirm the Fixed Trunk ID if you

enable Fixed Outgoing Call Rule. That means the ePBX will route the call to a fixed

Trunk if you enable this feature. For example, you set Fixed Trunk ID for extension 101

to 888. And you enable Fixed Outgoing call Rule for a certain route record, such as 8

with length 10. When 101 call a number 8xxxxxxxxx, the ePBX will route this call to 888

no matter you set what’s the Primary Destination for such route record.

Note:

• For more information about Fixed Trunk ID, please refer to the user manual:

CH3.1.2 Extension

„ Route Timeout: Enable this field will make this route record initial Timeout function.
„ Route Level: You can define the Route Level for such route record. For example, you

define a route record with prefix 0 and the Route Level to R3. That means only the

subscriber with DialPlan [ext+R123] and [ext+allroutes] can use such record due to

only these two DialPlan contain the Route Level of R3.

Press Apply to save configuration, or press Cancel to quit configuration.

3.1.6.2 Incoming Call Rule

Incoming Call Rule means call from other non-subscriber device to ePBX-100A-128.

For example, you set the ePBX-100A-128 to register an ISTP as a SIP Trunk, so your

ePBX-100A-128 could be as an “Extension” of ITSP. The other subscriber of ITSP could

call to ePBX-100A-128 by the registered line number, when the ePBX-100A-128 got an

incoming call, which is not its own subscriber, what will the ePBX-100A-128 do? The

ePBX-100A-128 will perform the following example based on the “Incoming Call Rule”.

The following example means the ePBX-100A-128 got a called number 070070, which was

sending from a non-subscriber of ePBX-100A-128, ePBX-100A-128 will drop 6 digits then add **999 as

the destination number. **999 is the default number of auto attendant. So the caller will hear greeting

because the called number will be routed to auto attendant.