Welltech ePBX-100A-128 - Manual (Page 47)

47
„ Group Number: Input a specific Group Number here.
Note:
•
The Group number should NOT be the same with Extension, Trunk Number, and
Speed Dial Number. All of the Numbers should be unique for ePBX-100A-128
system.
„ Telephone Number: Set which members to join this Dial Group. You can input
multiple members by a “comma”, such as [101,102,103]
„ Type: You can choose the Ring type for Dial Group; include Ring All, Sequential Ring
and Random Ring.
„ Ring All Type End To: If you choose the Ring Type to Ring All, you can decide the
final destination if no one of group answered. You can select IVR, EXT VoiceMail or a
Number (extension or PSTN number…, etc).
3.1.8 Speed Dial
SpeedDial Table is used to set the Speed Dial function; you can just input a SpeedDial
Number and set the destination number to Telephone Number field. Subscriber can just dial
to the SpeedDial number and ePBX-100A-128 will switch the call to Telephone Number
then call out.
Enter Configuration Æ Speed Dial to add Speed Dial record then press Apply.