Welltech ePBX-100A-128 - Manual (Page 7)

7
1.2 Hardware Overview
1.2.1 Front Panel and LED Indication
„ Power: Light on when ePBX-100A-128 is powered on.
„ Status: Light on when system is ready.
„ Alarm: Light Flash when system is upgrading software, please do not unplug power
when Alarm is flashing.
„ SIP Trunk: Light on when ePBX-100A-128 successfully registered to all of the enabled
SIP Trunks; Light flash when ePBX-100A-128 failed to register to one of the enabled
SIP Trunks; light off when there is no SIP Trunk has enabled.
„ CDR: ePBX-100A-128 can output Call Detail Records to external computer. User has
to execute CDR program on computer, when ePBX-100A-128 is ready to connect with
CDR server and output data, this indication will light on.
Note:
• CDR Function can only work in local area network. Please prepare the CDR
server under LAN.
•
The CDR server is Welltech proprietary, for more information about CDR, please
contact with the sales person of Welltech.
„ NET: Display Network status. If WAN port of ePBX-100A-128 is under Fixed IP mode,
LCD will light on. If WAN port is under DHCP or PPPoE mode, and ePBX-100A-128
succeeds in getting IP, LED will be flashing. If WAN port is under DHCP or PPPoE
mode, and ePBX-100A-128 fails to get IP, LED will light off.
„ WAN
•
LINK/ACT: Light on when WAN port is connected to network. Flash when data is
transmitting or receiving.
•
10/100: Light on when network rate is 100 Mb/s, and light off when network rate
is 10 Mb/s.
„ LAN
•
LINK/ACT: Light on when LAN port is connected to network. Flash when data is
transmitting or receiving.
•
10/100: Light on when network rate is 100 Mb/s, and light off when network rate
is 10 Mb/s.