Welltech IP-380 v.1.0 - Manual (Page 84)

iP380 User Manual
Welltech Technology Co., Ltd.
84 / 104 2012/11/01
(Figure 10)
Step 3: In [Auto Provision Setting] web page, Check [TFTP Server] field, upload this data (See
Figure 11).
Note：If start TFTP Server at the same time, This field parameter can’t see data, Because this data
upload provision function by TFTP Server.
(Figure 11)
Step 6: Enter [Service Domain Setting] web page, Check [Realm: 1] Setting, Use [MACID.dat]
file to load configuration.
 DHCP Option 66 (TFTP)-2 (Please refer to DHCP Turbo document)
Step 1: Install [DHCP Turbo + TFTP Turbo] software, Then placed [MACID.dat] file into the
specified directory.
Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto
Discover: DHCP Option 66 (TFTP)] (See Figure 12).
(Figure 12)
Step 3: In [Auto Provision Setting] web page, Check [TFTP Server] field, the field will upload this
data (See Figure 13).
Note：If start TFTP Server at the same time, This field parameter can’t see data, Because this data
upload provision function by TFTP Server.