Welltech IP-380 v.1.0 - Manual (Page 13)

iP380 User Manual
Welltech Technology Co., Ltd.
13 / 104 2012/11/01
Key Explanation Remark
b. Once caller(iP380) disconnect, the 3 rd
party call was disconnect either.
c. In addition to the caller, any one
disconnect and quit 3-party conference
call, the caller(iP380) with online people
can remain talking.
Pick a. User hear the nearby phone incoming
ringing and press “Pick” key to answer this
call from nearby phone.
b. Or Off-Hook first, choose talk mode then
press “Pick” key to pick up nearby
incoming phone call.
Pickup call group
Trans a. In a talking line, press “Trans” key and
dial the transferee number to transfer this
call.
b. If the transferee number does not answer
this call, user can press “Trans” key again
to retrieve this call.
Transfer
Redial a. Press this key to dial the last dialed
number automatically.
b. In LCD screen, User can use navigation
keys to choose a phone number in the
dialed list and press “Redial” key to dial
out automatically.
Redial the last dial
phone number
Hold In the talk time, press this key to make the
call on hold. Then press this key again will
unhold or press L1~L3 key(LED flashing)
unhold this call.
Retention
a. Press this key can enable “Handfree”
function (In the “Headset” or “Handset”
mode can use this key to “Handfree”
mode).
b. If there is a call in the “Handfree” mode,
press key will change to “Headset”
mode immediately.
c. If there is a call in the “Handfree” mode,
User can pick up the handset, iP380 will
Handfree