Welltech IP-380 v.1.0 - Manual (Page 41)

iP380 User Manual
Welltech Technology Co., Ltd.
41 / 104 2012/11/01
(Figure 10)
Step 2: At 21:00 everyday, the alarm will start to work and last for 1 minute. After 1 minute, the
alarm will stop. During ringing and pick up the phone, the alarm will stop automatically.
2.1.6. General (Normal Setting)
2.1.6.1. Functions
General Provide Caller ID, Call Waiting, Auto Answer and etc.
2.1.6.2. Instruction
Figure 1: iP380 Device
(Figure 1)
Item Explanation
Call Waiting Default: Enable.
When Setting up Call Waiting Enable and an incoming call arrives, you
will hear a waiting tone. If you want to answer this waiting call, you
need to press the key [Hold] to hold existing call and answer incoming
call.
Provide options: Disable, Enable.
Ring Timeout Default: 60 seconds.
iP380 Phone will send a stop message to the caller when the Ring
Timeout was expired.
Provide options: 20, 40, 60, 80, 120, 180 and 240.
Auto Anwser Call Default: Disable.
If you Enable this function and when receiving an incoming call, iP380
phone will answer the call automatically and enable Loud Speaker
Phone feature.
Provide options: Disable, No Ring (auto answer), or 1,2,3,4,5 rings.
Auto On-Hook
After Bye
Default: 30 (seconds).
iP380 phone will auto On-hook (drop this call) when it received a bye
message after configured time was expired.
Provide options: 0, 5, 10, 20, 30.
Mute After Auto
Answer
Default: Disable.
If you Enable this function, iP380 phone will activate mute feature after
it answer a call automatically.
Provide options: Disable, Enable.
Submit [Button] Save the settings.
2.1.7. Volume
2.1.7.1. Functions
Volume can setup received volume and transmitted gain and ring type of this iP380 IP Phone.