Welltech IP-380 v.1.0 - Manual (Page 16)

iP380 User Manual
Welltech Technology Co., Ltd.
16 / 104 2012/11/01
First Layer Secondsond
Layer
Third Layer Fourth Layer Explanation
mask
3.Default
Gateway
Set up network
gateway
3.PPPoE
Setting
1.User name Set up PPPoE
user name
2.Password Set up PPPoE
password
2.LAN set up 1.Bridge Set up bridge
mode
2.NAT Set up NAT mode
3.DNS 1.Primary DNS Set up the first
DNS server
location
2.Secondary
DNS
Set up secondary
DNS server
location
4.VLAN 1.Activation 1. Enable
2. Disable
Start/Stop VLAN
feature
2. VID Setup VLAN ID
5.Status Show network
state
6.NETWORK
Speed
1.Auto Set up network
speed
automatically
2.100M Full Set up network
speed 100M
Full-duplex
automatically
3.100M Half, Set up network
speed 100M
Half-duplex
automatically
4.10M Full Set up network
speed 10M
Full-duplex
automatically
5.10M Half Set up network
speed 10M
Half-duplex
automatically
5. SIP Setting
*Admin Use
1.Service
domain
1.First realm Activation
(Enable/Disable)
First SIP account
activation
Display name Set up account
display name
Phone number Set up SIP
account phone
number
Auth. name Set up SIP
account register
name
Auth. password Set up SIP