Welltech IP-380 v.1.0 - Manual (Page 63)

iP380 User Manual
Welltech Technology Co., Ltd.
63 / 104 2012/11/01
(Restore Default Setting).
2.3.3. Virtual Server
2.3.3.1. Functions
Virtual Server Provides 12 sets of Virtual Server information.
2.3.3.2. Instruction
Item Explanation
Index Show the number.
Active Default: Not use.
If you select it, the setup will be started.
Protocol Default: TCP.
Select the Protocol: TCP or UDP.
Internet Port Show the address of Internet Port.
Setup the Internet Port address of Start and End.
This column can only enter numbers; maximum length is 5 bytes with
the range of 1~65533.
If you want to Setup fixed Port, you should enter the same number for
the two columns.
If you want to Set up a period of Ports, the left column is Start Port and
the right column is End Port.
Extranet Port Show the address of Extranet Port.
Setup the Extranet Port address of Start and End.
This column can only enter numbers; maximum length is 5 bytes with
the range of 1~65533.
If you want to Setup fixed Port, you should enter the same number for
the two columns.
If you want to Setup a range of Ports, the left column is Start Port and
the right column is End Port.
Server IP Address Setup the Internal Server IP address.
The type is xxx.xxx.xxx.xxx of 15 bytes.
Action Provide [Delete] button to erase the data.
Submit [Button] Save the Settings.
Delete All [Button] Reset all data.
Note: 1. Internet & Extranet Port parameter, Please remember to avoid the local iP380 default