Ip380 user manual – Welltech IP-380 v.1.0 User Manual

Page 53

iP380 User Manual

Welltech Technology Co., Ltd.

53 / 104

2012/11/01

Item

Explanation

IPv6 Active

Default is automatically. Setup IPv6 connection type. Provide

drop-down options: Automatically, Static IPv6 Address, IPv6 In IPv4

Tunnel.

Automatically: According to SIP Server or IP-PBX server response to

iP380 IP Phone, it selects IPv6 or IPv4 to get IP address.

Static IPv6 Address: Setup IPv6 address manually.

IPv6 In IPv4 Tunnel: Setup IPv6 address manually, the specified

packets forwarding via from Tunnel Server.

WAN IPv6

Setup WAN port to IPv6 connection information.

IPv6 Address

Default is 2001:0:0:0:0:0:0:1 to Setup IPv6 address.

Subnet Prefix

Length

Default is 64; Setup the network address mostly. Only use number,

Data Settings secondstion is 0~255, maximum length is 3 bytes.

Default Gateway

Default is 0:0:0:0:0:0:0:0; Setup IPv6 default gateway address.

Submit [Button]

Save the Settings.

Reset [Button]

Clear entered data.

Figure 3: IPv6 Actvie: IPv6 in IPv6 Tunnel

(Figure 3)