Welltech IP-380 v.1.0 - Manual (Page 32)

iP380 User Manual
Welltech Technology Co., Ltd.
32 / 104 2012/11/01
strings (*#), maximum length is 15 bytes.
Voice Mail Set up [Voice Mail] feature code. This code must be compatible with
IP-PBX server [Voice Mail] service code. These columns can enter
numbers and strings (*#), maximum length is 15 bytes.
Submit [Button] Save the Settings.
Delete All [Button] Reset all data.
2.1.2.3. Operate Instruction
Example 1: BLF State
Step 1: In [BLF] web page, Setup [Index: 1, Name: op, Number/URL: 900, Realm:Realm 1 ;
Index: 2, Name: test, Number/URL: 812345679, Realm: Realm 1] (See Figure 1).
(Figure 1)
State description : Index 1 and Index 2 SIP accounts (extension or FXO line) on IP-PBX Server are
registered, the icon on iP380 LCD show steady ON ; when the extension or FXO
Line number is busy, state is flashing. If the number was not registered IP-PBX
server successfully (for instance, turn OFF) the equivalent icon on LCD, state
was no show. Or, if you do not configure icon with phone number and name, it does not
show up either.
Example 2: [Pick Up & Voice mail] Button
Step 1: In [Speed Dial Setting] web page, Setup [Pick up: *98, Voice Mail: *97] (See Figure 2).
(Figure 2)
Description 1: Need to pick up nearby ring phone call, please press iP380 [Pick] key, iP380 will
pick up nearby ringing phone (This phone must stay at the same pick up group).
Description 2: Execution and listen voice mail messages, press
key to enter voice mail
process.
Example 3: LCD Panel Operation