Welltech LP-201 Mar-11-2005 - Manual (Page 59)

SIP SIP-Phone Administration Guide
58
20. [prefix] command
1. -print: show all current configurations.
2. -add: add a rule to drop or insert prefix digits of out going call. (prefix –add prefix
“prefix number” drop 0/1 insert “insert number”).
3. -delete:delete arule to drop or insert prefix digits of out going call.(prefix –delete
prefix “prefix number”).
4. -modify: modify a rule to drop or insert prefix digits of out going call.(prefix –modify
prefix “prefix number” drop 0/1 insert “insert number”)
5. -prefix: set which prefix number to implement prefix rule.
6. -drop: enable or disable drop function. If this function is enable, Lan-Phone will
drop prefix number on out going call.
7. -insert: set which digit to insert on out going call.
21. [rom] command
8. -print: show all current configurations and version information.
9. -app,-boot, -dsptest, -dspcore, -dspapp,: upgrade main boot code, main
application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
Note:
After upgrade Application, please remember to execute flash –clean command,
which will clean all configurations become factory values except IP address.
3. -boot2m: to upgrade 2mb rom file, which includes all firmware file mentioned in
item 2.