Welltech LP-201 Mar-11-2005 - Manual (Page 44)

SIP SIP-Phone Administration Guide
43
Chapter 4 Configuring the SIP-Phone through Telnet command
lines
After setting the IP Address of SIP-Phone and reboot, (please refer to LCD Menu: 5-3.4.5),
user can enter into Telnet command lines.
Note:
1. After user enter SIP-Phone configuration via telnet, please use login: ” root ”,
password: null, press enter to enter command lines. If user forgets password,
please contact with the distributor, we will generate a specific password
according to your MAC address of SIP-Phone.
2. User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
3. After any change of configuration, please remember to do commit command to
save changes and then reboot command to reboot system.
1. [help] command
Type help or man or ? to display all the command lists. The following figure is shown
all commands of SIP-Phone.