Welltech LP-201 Mar-11-2005 - Manual (Page 17)

SIP SIP-Phone Administration Guide
16
2. LCD Menu Configuration
User can set the following configurations by LCD keypad.
Note:
1. Press TRANSFER before input data can switch characters to be capital or
lowercase.
2. Press SPEED before input data can switch input mode as character mode or
digit mode; for example, user wants to enter IP address, after pressing SPEED
can enter digits directly.
3. When user is inputting data, press C will jump out to menu list, press will
clear previous input data.
1. Call List
If there is an unanswered IP call, it will be kept in message box. MESSAGE LED will
be flashing until user press MESSAGE to check miss call and re-press MESSAGE
to return to main screen.
(1) Missed Calls： ： ： ：to see all missed calls in message box.
(2) Received Calls： ： ： ：to see all received calls in message box.
(3) Dialed Numbers: to see all dialed calls in message box.
2. Forward Type
There are 3 selections in Forward type, user must select under which condition to
forward calls.
(1) Busy
When SIP-Phone is in busy status, the incoming call will be
forwarded to the assigned phone number.
A. Activate
Enter a forwarded phone number to activate busy forward function.
B. Deactivate
Deactivate Busy Forward function.
(2) No Response
When SIP-Phone hasn’t been picked up for around 10 seconds, the
incoming call will be forwarded to the assigned phone number.
A. Activate
Enter a forwarded phone number to activate no response forward
function.
B. Deactivate