Welltech LP-201 Mar-11-2005 - Manual (Page 21)

SIP SIP-Phone Administration Guide
20
Set Outbound Proxy IP address or Domain Name.
C. Proxy port
Set Proxy port for SIP-Phone to send messages.
D. Expire (in seconds)
Set expire time of registration, in the duration of 2/3 expire time,
SIP-Phone will re-register to Proxy Server again.
(3) User Info
A. User Name
Set User Name of SIP-Phone to register to Proxy Server. If Proxy
server doesn’t request specific User name, please enter Line
number here.
B. Line Number
Set Line Number of SIP-Phone to register to Proxy Server.
C. Password
Set User Password of SIP-Phone to register to Proxy Server.
This configuration is not necessary, if Proxy server doesn’t
request client to set password, user only has to set User Name
the same as Line Number.
2. Firmware Update
(1) Download method
There are two methods to download new version file, please move the
“>“ symbol by press or on the keypad to select TFTP or FTP
method, then press OK to confirm it.
(2) FTP/TFTP Sever
User has to offer one TFTP/FTP server IP Address and set this IP
Address via keypad. The IP Address is necessary for upgrading
SIP-Phone new application rom file.
(3) FTP Account
User has to input user name for FTP server login .It is necessary for
upgrading SIP-Phone new application rom file via FTP method.
(4) FTP Password
User has to input password for FTP server login .It is necessary for
upgrading SIP-Phone new application rom file via FTP method.
(5) File Name
User has to press the file name of new application rom file prepared for
upgrading
(6) Application Version
Show current version of application.