Welltech LP-201 Mar-11-2005 - Manual (Page 58)

SIP SIP-Phone Administration Guide
57
19. [bureau] command
1. -print: show all current configurations.
2. -hotline: set hotline table. User can set hotline function to specify one IP address
for SIP-Phone to dial out directly. Once user picks up SIP-Phone, it will
automatically dial out to the assigned IP address and number.
(bureau –hotline “IP address” “phone number of remote site”)
Note:
To set SIP-Phone as hotline mode, user has to set SIP-Phone as Peer-to-Peer
mode, and sysconf –service 2 command.