Welltech LP-201 Mar-11-2005 - Manual (Page 49)

SIP SIP-Phone Administration Guide
48
10. [pppoe] command
1. -print: display all current configurations and information.
2. –id: to set PPPoE authentication user name.
3. –pwd: to set PPPoE authentication password.
4. –reboot: Choose enable or disable this function. If user enables this function, after
PPPoE disconnected, SIP-Phone will automatically reboot to re-connect, and after
reboot, if SIP-Phone still can’t connect with server, SIP-Phone will keep trying to
connect. On the other hand, if user disables this function, SIP-Phone won’t reboot
and keep trying to connect. (pppoe –reboot 0/1)
5. –echo: Enable or Disable PPPoE Echo function. If user enabled this feature, SIP
Phone will send out echo request to check PPPoE connection status. Please notice
that if user disables this function, SIP Phone cannot detect if PPPoE connection is
still alive or not. (pppoe –echo 0/1)
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP-Phone.
Note:
1. After user upgrade new software version, suggested to execute this command to
make sure new software work well on SIP-Phone.
2. To execute the command flash –clean, all configuration of SIP-Phone stored in
flash will be cleaned. It is authorized for the user whose login name is “root” only.