Welltech LP-201 Mar-11-2005 - Manual (Page 51)

SIP SIP-Phone Administration Guide
50
13. [sip] command
1. –print: display all current configurations.
2. –mode: configure SIP-Phone as Proxy or Peer-to-Peer Mode.
Usage: sip –mode 0/1(1 for Proxy mode, 0 for Peer-to-Peer mode)
3. –px: set Primary Proxy server IP address or URL address (sip –px “IP address or
URL of Proxy server”).
4. –pxport: set listening port of Primary Proxy server.
5. –px2: set secondary proxy server IP address or URL address (sip –px “IP address
or URL of Proxy server”).
6. –px2port: set listening port of Secondarry Proxy server.
7. –outpx: set IP address of outbound proxy server. After user set outbound proxy, all
packets form SIP-Phone will be sent to outbound proxy server.
8. –outpxport: set listening port of Outbound Proxy server.
9. –prefix: set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, SIP-Phone will sent out
messages as Account Name @”IP address of Proxy”, if user set prefix as abc,
SIP-Phone will set out as abc123@”IP address of Proxy”. This function is for special
proxy server.
10. –line: identify one number for the SIP-Phone to register to the Proxy (SIP –line
“line number”).
Note: In proxy mode please remember to set user account information under
security command.