Welltech LP-201 Mar-11-2005 - Manual (Page 48)

SIP SIP-Phone Administration Guide
47
8. –timezone: User can set different time zone according to the location SIP-Phone is.
For example, in Taiwan the time zone should be set as 8,which means GMT+8.
(GMT-8: ifaddr –timezone -8)
9. -ipsharing: If SIP-Phone is behind an IP-sharing, user must enable IP sharing
function and specify public IP address. (ifaddr –ipsharing 0/1 “public IP address
of IP sharing”, 0 for disable and 1 for enable)
Note:
Some Proxy servers support endpoint behind NAT function, in this case SIP-Phone
doesn’t have to enable IP sharing function, please contact with your Proxy Server
vendor.
10. –upnp: enable/disable UPnP function. If the IP sharing or NAT device supports
UPnP, user can enable UPnP function so that SIP-Phone will automatically connect
with NAT device without configuration in SIP Phone and NAT device.
11. –server: set EMS server IP address.
12. –id: set EMS login user ID.
13. –pwd: set EMS login user password.
14. –emstime: set EMS server recycle time.