Welltech LP-201 Mar-11-2005 - Manual (Page 31)

SIP SIP-Phone Administration Guide
30
value is 5060.
- Outbound Proxy: Set IP Address or URL address (Domain Name Server must be
configured. Please refer to Network Configure) of outbound Proxy server.
- Outbount Proxy port: Set outbound proxy port for LP201to send message, default
value is 5060, if there is no special request of proxy server, please don’t change this
value .
- Phone Book Search: enable/disable phone book search function. If user enabled
this function, SIP-Phone will search dialed number in phone book to see if there is
any matched table before send to Proxy server, and if there is a matched data in
phone book, SIP-Phone will make call to related IP address.
- Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, SIP-Phone will sent out
messages as Account Name @”IP address of Proxy”, if user set prefix as abc,
SIP-Phone will set out as abc123@”IP address of Proxy”. This function is for special
proxy server.
- Line Number: identify one number for the SIP-Phone to register to the Proxy.
- Line Account: set user name of SIP-Phone for registering. User can set user name
and password for registering. If password is no need, please set user name the
same as line number or SIP-Phone won’t register successfully.
- Line Password: set password for registering.
- SIP Port: set SIP UDP port.
- RTP Port: set RTP port for sending voice data.
- Expire: set expire time of registration. SIP-Phone will keep re-registering to proxy
server before expire timed out