Wavetronix Command DataView (CMD-DV) - User Guide - Manual (Page 27)

26 CHAPTER 3 • STATIONS PAGE
Note
If the Edit Stations toolbar button was used on the main Stations page, only those
stations that were originally selected will be available by using the Prev and Next
buttons. To select other stations to view and edit, use the Search button.
Remove Stations
To remove stations from the list, put a check next to the desired station ID(s) and click
Remove Stations.
Import Stations
The Import Stations page allows you to import one or more stations through existing sta-
tion files. Supported station files include TMG, CSV and the standard DataView station file
format.
To upload a new file to the system, click Select and choose a file from the local machine.
Click Upload when the file has been selected. If the uploaded file is a supported and recog-
nized station file, it will appear in the File List with its name and file type.
To import stations from uploaded files, switch to the Stations tab (see Figure 3.6). All
available stations will be listed in the station list. Select one or more stations from the list
and click Import Selected. Click Import All to import all available stations. Checking/
unchecking the checkbox in the left column header will automatically check/uncheck all
stations on the page.
Figure 3.6 – Import Stations Page
If there are more stations to display than the selected page size, use the page controls at the
bottom of the grid to switch between pages. The number of stations displayed per page can
be adjusted using the Page Size: control at the bottom of the grid. Station columns can be
sorted by clicking on the column headers; a second click will sort that column in the op-
posite direction.