WattMaster WCC III part 4 - Manual (Page 67)

WCC III Technical Guide 3-63
WCC3.EXE SCREEN DESCRIPTIONS
An analog output is a proportional DC voltage supplied by the
SAT III with a maximum range of 0-15 VDC. The analog outputs
are proportional only, not proportional plus integral (PI), or
proportional plus integral plus derivative (PID).
Analog Out
Specifi es the summary type to be displayed. Because this is a
“choice” fi eld, the list of available choices will be displayed at the
bottom of the screen.
Trend Logging, Logic Switch, Binary Output>
Make your selection by pressing the until the desired
summary type has been selected, and then press . If you
select a summary type that is different than that currently being
displayed, the screen will be rewritten with the new information.
Satellite ______
Specifi es the number of the satellite which you are currently
communicating with. If you would like to view the analog output
summary data for a different satellite, use the arrow keys to
move the cursor to this fi eld, enter the desired number, and press
.
To view or edit a specifi c analog output, use the arrow keys to move
the cursor (shown as “>” along the left hand side of the screen) to
the desired point, and press
. The Analog Output Screen
for the specifi ed point will appear.
Time / Date
The current time and date will automatically be displayed here.
COMMENTS
The description message which is entered on the individual Analog
Output Screens will automatically appear here to help you identify
the different analog outputs within the system.
STATUS
The amount of DC voltage supplied by the analog output is shown
here to help you monitor the status of the analog output.
Analog Output Satellite # 1 Sat. #1 Time Date
08:53 1/20
Analog Outputs
COMMENTS STATUS MODE CURRENT INPUT INPUT RANGE OUTPUT RANGE
P1: P1
10.0 V alt 99.0 Deg F 20.0 - 80.0 5.0 - 10.0 V
P2: P1 10.0 V alt 99.0 Deg F 20.0 - 80.0 5.0 - 10.0 V
P3: P1 10.7 V alt 99.0 Deg F 20.0 - 80.0 5.0 - 10.0 V
P4: V alt
P5: V alt
P6: P1 5.0 V alt 9.0 Deg F 20.0 - 80.0 5.0 - 10.0 V
P7: P1 5.0 V alt 9.0 Deg F 20.0 - 80.0 5.0 - 10.0 V
P8: P1 5.0 V alt 9.0 Deg F 40.0 - 80.0 5.0 - 10.0 V
HOME for menu
ANALOG OUTPUT SUMMARY SCREEN
Analog Output Screen’s WCC III Logical Address is XXXPY, where XXX = Satellite Address #,
P = Analog Output, Y = Analog Output #
Analog Output Summary Screen