Wcc3.exe screen descriptions, Analog input summary screen – WattMaster WCC III part 4 User Manual
Page 16
WCC3.EXE SCREEN DESCRIPTIONS
WCC III Technical Guide
3-12
An analog input is a signal sent to the satellite controller that can
be represented by a number such as temperature, pressure, etc.
The Analog Input Screen is used to “tell” the WCC III system the
characteristics of the sensor and to set alarm limits. The “Binary
Setpoint” option at the bottom of the Analog Input Screen can be
used to convert the analog input to a binary (On/Off) input.
Analog Inputs
Specifi es the summary type to be displayed. Because this is a
“choice” fi eld, the list of available choices will be displayed at the
bottom of the screen:
Trend Logging, Logic Switch, Binary Output> You can access one of the screens which appear in this choice fi eld until the desired summary type has been selected and then pressing . Satellite______ Specifi es the number of the satellite which you are currently . 1 to 239. To view or edit a specifi c analog input, use the arrow keys to move . The Analog Input Screen for the specifi ed point will now appear. Time / Date The present time and date will automatically appear at these Description:_______________ The description message which was entered on the Analog Input ANALOG INPUT SUMMARY SCREEN ----------------------------------------------------------------------------------------- Analog Inputs Satellite 1 S1-KC Time Date Analog Inputs 08:22 01/20 Description Current Value Alarm Limits Stat Mode Alarm Details A1: S1-A1 50.0 Deg F 65.0 80.0 ON A2: S1-A2 0 Deg F 45.0 65.0 OFF A3: S1-A3 0 Deg F -10.0 100.0 ON A4: S1-A4 0 Deg F 45.0 100.0 ON A5: S1-A5 C1: OFF C2: OFF C3: OFF C4: OFF C5: OFF HOME for menu Analog Input Screen’s WCC III Logical Address is XXXAY, where XXX = Satellite Address, A = Analog Input, and Y = 1-8 Analog Input Summary Screen
without returning to the Main Menu by pressing the
communicating with. If you would like to view the analog input
summary data for a different satellite, use the arrow keys to move
the cursor to this fi eld, enter the desired satellite number, and press
the cursor (shown as “>” along the left-hand side of the screen) to
the desired point and press
locations.
Screen is displayed here to help you identify the different analog
inputs within the system.
A6: S1-A6
A7: S1-A7 9.0 Deg F
A8: S1-A8 99.0 Deg F
C6: OFF
C7: OFF
C8: OFF