Visara FEP-4600 Planning Guide - Manual (Page 91)

37x5 to FEP-4600 Migration and Planning Guide
707117-003 7-11
VTAM Cross Domain Resource Manager Changes
Since resources in the foreign network no longer appear to be on a foreign network, you
need to remove references to the foreign network(s) from the CDRM Major Node table.
This includes all foreign NETWORK references and GWPATH references for networks
now fronted by the FEP-4600, along with CDRMs that are located in those networks.
These will be replaced by a CDRM entry for each subarea that is defined to the FEP-
4600. (References to the foreign CDRMs and foreign networks will continue to be
referenced in the ADJSSCP table.)
CDRM Example 1:
CDRM for VTAM 03 (Before)
CDRMSA03 VBUILD TYPE=CDRM
NETWORK NETID=NET2
ACME1 CDRM CDRDYN=YES,CDRSC=OPT
GWPATH GWN=GWNCP4,ADJNET=NULL,ADJNETSA=99,ADJNETEL=1
CDRM for VTAM 03 (After)
CDRMSA03 VBUILD TYPE=CDRM
FEP4600 CDRM CDRDYN=YES,CDRSC=OPT,SUBAREA=5
Without the NETWORK reference, the NETWORK is assumed to be NET1 (the local
network). FEP4600 is the name being given to the subarea for the FEP-4600 but can be
any valid name as long as it is also configured in the FEP-4600.
CDRM Example 3:
CDRM for VTAM 03 (Before)
CDRMSA03 VBUILD TYPE=CDRM
NETWORK NETID=NET2
ACME1 CDRM CDRDYN=YES,CDRSC=OPT
GWPATH GWN=GWNCP4,ADJNET=NULL,ADJNETSA=99,ADJNETEL=1
NETWORK
NETID=NETB
BRF1 CDRM CDRDYN=YES,CDRSC=OPT
GWPATH GWN=GWNCP4,ADJNET=NETX,ADJNETSA=38,ADJNETEL=1
NETWORK
NETID=NETQ
PDK1 CDRM CDRDYN=YES,CDRSC=OPT
GWPATH GWN=GWNCP4,ADJNET=NETX,ADJNETSA=12,ADJNETEL=1