Visara FEP-4600 Planning Guide - Manual (Page 105)

37x5 to FEP-4600 Migration and Planning Guide
707117-003 9-5
VTAM PATH Table Definitions
PATH tables need to be modified to include a path to the new subarea represented by the
FEP-4600
VTAM PATH Table Definitions for PROD3:
PATH0302 PATH
DESTSA=02,ER0=(02,1),VR0=0
PATH0301 PATH DESTSA=01,ER0=(01,1),VR0=0
PATH0305 PATH DESTSA=05,ER0=(05,7),VR0=0
VTAM PATH Table Definitions for ACME1:
PATH1012 PATH
DESTSA=12,ER0=(12,12),VR0=0
VTAM CDRM Major Node Definitions
The CDRM definitions need to be modified to remove any references to the foreign
network and a CDRM definition representing the FEP-4600 should be added. Examples
of the CDRM Major Node definitions are shown below.
CDRM Definitions for PROD3:
CDRMSA03 VBUILD
TYPE=CDRM
PROD1 CDRM SUBAREA=1,CDRDYN=YES,CDRSC=OPT
PROD2 CDRM SUBAREA=2,CDRDYN=YES,CDRSC=OPT
PROD3 CDRM SUBAREA=3,CDRDYN=YES,CDRSC=OPT
FEP5 CDRM SUBAREA=5,CDRDYN=YES,CDRSC=OPT
CDRM Definitions for ACME1:
CDRMSA10 VBUILD
TYPE=CDRM
ACME1 CDRM SUBAREA=10,CDRDYN=YES,CDRSC=OPT
FEP12 CDRM SUBAREA=12,CDRDYN=YES,CDRSC=OPT
VTAM CDRSC Major Node Definitions
CDRSC definitions may not be used. If they are however, no changes are required to
make those definitions continue to be used with the FEP-4600.