Visara FEP-4600 Planning Guide - Manual (Page 59)

37x5 to FEP-4600 Migration and Planning Guide
707117-003 6-3
LPAR 1 LPAR 2
SSCP SSCP
Scenario 2:
The next scenario show Channel-to-Channel connections between adjacent SSCPs. These
SSCPs can reside in the same SNA network, on same or different CPUs, and on same or
different physical locations.
More specifically, the FEP-4600 can be configured to support these connections:
SSCP to SSCP traffic between two LPARs:
If a director is used, each LPAR should have
an ESCON interface into the director, and a
single ESCON into the FEP-4600. If no
director is used, then each LPAR needs an
ESCON cable into the FEP-4600. The two
SSCPs can reside in the same SNA network or
can be located in two separate networks.
IP Network IP Network
CPU CPU CPU
FEP-4600
ESCON
Director
FEP-4600