Vinpower Digital Xerox LightScribe Series - Manual (Page 84)

84 Xerox LS Duplicator
Error
Code Error Message Description & Recommended Solutions
260 No Update File Description:
The duplicator can NOT locate the Firmware Update File
during the Update Firmware process .
Possible Solution:
1 . Confirm the file is not a “zip” file . If it is, please extract it
before you burn it into a CD .
2 . Confirm the update file is written as “Mode 1” Data CD .
Usually a Data CD created with Windows XP or Roxio’s
Drag-to-Disc is not in this format . Please use a software like
Nero Burning ROM .
. Make sure there are no other discs in the duplicator and
try to insert the update disc into another tray to perform
the operation .
261 Wrong update File Description:
The Firmware Update File is not compatible with your dupli-
cator or the Firmware Update File is corrupted .
Possible Solution:
1 . Try to re-download the Firmware Update File .
262 Unknown flash model Description:
The Firmware Update File is not meant for your duplicator .
Possible Solution:
1 . Try to contact Tech Support for the proper Update file .
26 User Abort Description:
A job is being aborted by user pressing the ESC/Escape but-
ton for more than 5 seconds during a job run .
Possible Solution:
Restart the job when ready with the proper master disc &
blank discs .