Vinpower Digital Xerox LightScribe Series User Manual

Page 22

22 Xerox LS Duplicator

Section 2: Making Copies from

the Reader (when the Reader is

selected as the source drive).

Step 1: Use the up or down arrow button to
navigate to the Copy menu:

Step 2: Press the >> button to enter the
Copy menu . You should then see the Coun-
ter feature screen .

The Counter feature will let you choose how
many copies you want to make for your
project . It allows the duplicator to count the
number of copies you’ve made for this job
and prompt you when the desired number
has been achieved .

You can choose not to input your desired
number of copies if you prefer to copy con-
tinuously with no interruption . (It will still
count the number of copies you’ve made
for this job, but it will not notify you when
to stop .) To do so, simply press >>button
when you see the “No Counter” on the 2nd
line of the screen below:

Or, you can choose to enter the desired
number of copies for this job by following
the simple procedure below:

Simply press the up or down button to
the following screen:

Duplicator 2.20
1. Copy

Counter:
No Counter

Counter:
Specify Counter

The Counter feature is for your
convenience only, and will
allow you to make more copies
than the amount desired, if so
required.

Note