Vinpower Digital Xerox LightScribe Series - Manual (Page 71)

Xerox LS Duplicator 71
Using the File Duplicator Utility:
When using the duplicator again after complet-
ing the above steps on the same PC:
Step 1: Power On the Duplicator & your PC
Step 2: Go to the Duplicator’s Setup menu
pressing the UP or DOWN arrow button, then
press the >> button to enter the menu .
Step 3: Navigate to “USB Connection”
submenu by pressing the UP or DOWN arrow
button .
Step 4: Press the >> button to enter the Auto
Start setting and you shall see a screen simi-
lar to the right:
Step 5: Use the up or down arrow button to
change the value to “On” .
Step 6: Press the >> button to submit the
change . Once completed, the duplicator will
restart automatically or you will be asked to
restart the duplicator .
Step 7: Use a USB 2 .0 Cable to connect the
Duplicator to your PC .
Step 8: You PC should now have a drive parti-
tion ready to access .
XEROX 2.20
14. Setup
Setup
15. USB Connection
USB Connection
Off
USB Connection
On