Vinpower Digital Xerox LightScribe Series - Manual (Page 79)

Xerox LS Duplicator 79
Error
Code Error Message Description & Recommended Solutions
200 Source Disc Empty Description:
The intended master disc is detected and identified success-
fully, but it is a blank disc .
Possible Solution:
Please double check the master disc to ensure it contains
data .
201 Bad Master Description:
The master disc is detected but can not be identified within
minutes .
Possible Solution:
Please check the master disc quality for defects or errors .
202 No Targets! Description:
The blank disc(s) are missing when the job has already
started .
Possible Solution:
Please make sure blank discs are placed in writer trays .
20 Burner Mixed or Firm-
ware version Mixed Description:
The model or firmware version of all writers in the duplica-
tor is not the same .
Possible Solution:
This typically happens when you recently replaced a writer
drive . Contact Tech Support .
Error Codes
Typically the duplicator will show an error message and error code if a problem occurs .
Please reference the below diagram for a description of the error codes and the recom-
mend solution: